top of page
How can we help?
Top suggestions
Products
How do I Install and link a Fluss+ device to open the gate with Gatebox?
Download the Fluss App Go to the App Store, PlayStore or App Gallery and search for Fluss, download and install it WARNING : Electrical shock hazard. Turn power off at the circuit breaker or switch and disconnect any batteries (if necessary) from the installation area before you begin installation. A qualified electrician may be required to complete the installation. You will need a small screwdriver (either flat or star, depending on the type of device you are installing F
How does Gatebox integrate with My Estate Life?
The good news is that Gatebox integrates seamlessly with My Estate Life without needing to set anything up specifically. This is because regardless of whether a site is using the My Estate Life app or just the Phonebook functionality, they are both based on the My Estate Life backend. So when the license is activated My Estate Life is automatically integrated. The only difference is that on the sites only using the Phonebook, there will be limited functionality on the My Esta
How do I set up the Gatebox device?
When setting up the device for the first time you'll need to activate your license. Once your license is activated you'll be able to set up the device to best match your sites needs. Double-tap the Gatebox Logo on the home screen and enter your Login Key to access settings. Under the settings you are able to adjust the Microphone and Speaker volume. The following settings can also be changed. Reader Direction: This sets whether the Gatebox is positioned at the entrance or e
What are the technical specifications on Gatebox?
External: Dimensions (mm): 330.0 (H) x 215.0 (W) x 50.0 (D) with Rain shield: 371,0 (H) x 285,4 (W) x 126,9 (D) Screen: 10,1” (1280x800), Capacitive Touch Screen Camera: 8MP 2D scanner: SA Driver’s License PDF417 & QR Codes Interface/Ports: 1 x USB Type-C, 1 x USB Type-A, 2 x GPIO, 1 x Expansion Slot, Ethernet RJ45, MicroSD Card Support (up to 128GB) AC adaptor: 12V@3A IP Rating: IP54 (front only) Operating Temperature: -10°C to 50°C Internal: Power over Ethernet: RJ45 IEEE 8
How do I install the Gatebox device into the Kiosk?
Mounting points are provided on the back of the Gatebox housing, as well as a hole in-between the mounting points for cable management. If the Gatebox is being installed in an unsheltered location make sure to mount with the rain shield. Powering Gatebox: We recommend using PoE (Power over Ethernet) as well as a backup power solution. If you do intend to run power separately a minimum of 12v 3A is required. Connecting Gatebox to the internet: We recommend using a hardwire con
bottom of page